The Cool Stir® Large Volume Magnetic Stirrer efficiently stirs fluid volumes from 10 liters up to 208 liters (2.5 to 55 gallons). Stirring speed is continuously changeable to around 600 rpm (maximum operational rpm depends on volume and density) delivering torque for mixing through powerful agitatio..
Benchtop sized cooler holds thirty-two 0.5 or 1.5ml microcentrifuge tubes at a temperature below 0ºC for approximately 3 hours. Use included insert to hold 0.5ml microcentrifuge tubes. Store at -20ºC for a few hours until the temperature of the cooler falls below 0ºC.
• Ideal for protecting valuable..
Offers the working volume of a culture tube and the convenience of a 96 well plate format. Can be used for a variety of processes and operations such as sequencing, precipitations and dilutions, and is compatible with deep freezing work or sample storage. Individually packaged and available sterile ..
Offers the working volume of a culture tube and the convenience of a 96 well plate format. Can be used for a variety of processes and operations such as sequencing, precipitations and dilutions, and is compatible with deep freezing work or sample storage. Individually packaged and available sterile ..
Polyethylene plastic pails have wide rims that hold their shape under heavy loads.
• Features heavy-gauge, plastic-coated metal bail and a pronounced spout.
• Recessed hand grip on the bottom of bucket aids in safe handling and pouring
• Graduations are in liters and molded on the interior..
Ideal for field use, inside incubators or anywhere else electricity is not convenient or simply not available. CE marked.
• Speed control knob for operation up to 900 RPM
• Can mix up to 1 liter using stirring bars up to 2.54cm (1”) in length
• Two “D” batteries (not included) provide approximately ..
Horizontally holds 12 volumetric or graduated pipettes 1ml and larger.
• Polyethylene plastic support is 24.1cm x 17.8cm (9½ x 7") wide and 29.2cm (11½") high
• There is 21.3cm (8⅜") between plates with a 1.9cm (¾") diameter carrying bar at the top
• Supports pipettes longer than 22cm (8⅝")..
This high-density polyethylene rack holds four separatory funnels on the lower shelf or four long-stem funnels on the upper shelf [maximum funnel diameter 98 mm (3⅞”)]. \
• Set screws allow shelf height adjustments anywhere along the 74 cm (29”) support rods
• Includes 24 insert clips that allow the..
Bright red safety disposal container is suitable for biological/biohazard materials, broken glass, recyclables or other waste and sized for benchtop or floor placement.
• One piece hinged lid protects users from contact with contents; helps retain odors and contain airborne contaminants
• Molded of..
Polypropylene Book Bottle style container has a gasketed spigot threaded into the bottle. It requires only a ¼" turn from closed position to full open and has a 9.5mm (⅜") I.D. opening that extends from the front of the bottle by 58mm (2.3").• 43mm I.D. neck features a leakproof seal plug as well as..
Polypropylene Book Bottle style container has a gasketed spigot threaded into the bottle. It requires only a ¼" turn from closed position to full open and has a 9.5mm (⅜") I.D. opening that extends from the front of the bottle by 58mm (2.3").
• 43mm I.D. neck features a leakproof seal plug as well ..
Unique, polypropylene book bottle stacks book-like on shelves for efficient use of space. • Includes top handle and convenient front grip hold for easy removal from a shelf• Capacity: 5 liters (1.25 gallons)
• Graduated markings on front in liters..
Ideal for rinsing, transport and storage of glassware.
• Polypropylene plastic baskets
• Three sizes available with or without lids• Simply invert lidded baskets for easy draining• Steam autoclavable at 121ºC (250ºF)..
These racks have 12 places (3 x 4 rows) for 300ml Biological Oxygen Demand Bottles.
•Stackable for storage or refrigeration allowing 16.7cm (6⁹/₁₆") between racks
•Epoxy coated steel wire is chemical and corrosion resistant and steam autoclavable at 121°C (250°F)..
For drying test tubes, beakers, flasks, and other labware, this stand has rubber tipped feet for non-skid use on a tabletop, or wire loops on the back for wall mounting.• Three rows of epoxy-coated hairpin-loop supports (14 in all) hold labware with 18mm I.D. necks or larger
• Top row has 12 straigh..
Store pipettors while protecting pipettor tips in these epoxy-coated aluminum racks that provide quick, easy access for more efficient work.• Holds up to 10 round shape pipettors such as Finnpipette®, Socorex®, Eppendorf® and other popular brands; two end holes fit Pipette-Aid® pipette fillers
• Two..
Increase cell viability during cell passaging with this highly accurate warming plate that keeps cells near an optimal 37°C (±1°C) outside of the incubator. 220V is CE marked.
• Keep dishes outside the incubator longer; 37°C plate protects cell viability; no need to return to the incubator repeatedl..
This wall-mounted dispenser is designed to hold either boxed or loose glasses.
• Large flip-up door for removing glasses
• Open top for easy filling• Made from clear acrylic
• Includes predrilled holes on the back panel for wall mounting (hardware not included)..
Tilt your test tube rack to 25°, 35° or 45° to reduce hand strain when working with pipettors. Also ideal for creating agar slant tubes or use with the Mini-Magnifier (F37865-0000) to aid in the viewing of Petri dishes.
• Base legs have predetermined slots that stand slides in and out of to easily ..
This polypropylene rack holds up to 25 thermometers in correct vertical position to prevent separation which may occur when thermometers are stored improperly.
•Top and middle plate hole diameters: 7.9mm (⁵⁄₁₆")
•Bottom plate has 3.2mm (¹/₈") diameter drain holes
•Distance between top and bottom pla..